BLV Cube 3D Printer Mainboard Duet3 6HC with 3HC Expansion Board Clone

Features of the Duet3 6HC Main Board
Processor: Employs a robust 32-bit ARM Cortex M7 operating at 300Mhz.
Connectivity: Facilitates high-speed bus connection to a singular-board computer like Raspberry Pi for superior user interface potential.
Stepper Drivers: Equipped with 6 robust Trinamic 5160 stepper drivers, offering up to 4.45A RMS and 6.3A peak. It includes smart features like firmware operation of all functions up to 256 microsteps, StallGuard2, and StealthChop2.
Expansion Support: Fully compatible with upcoming Duet3D expansion boards, intelligent tools, and custom plug-ins through the CAN-FD bus, offering support for up to 8 3-channel expansion boards, supplementing another 24 stepper channels initially.
PWM Outputs: Offers 10 variable current capacity PWM outputs designed for one high-current heating bed, 3 extruders, and 6 fans.
I/O Ports: Boasts 9 I/O ports designed for endstops, probes, filament monitors, and other sensors.
Temperature Inputs: Supports 4 thermistor/PT1000 inputs and 4 PT100/thermocouple inputs through optional daughter boards.
Web Interface: Integrated web interface accessible through PC, tablet, or smartphone on the same network.
Configuration and Firmware Updates: Simplified setup and firmware updates via the web interface.
Geometry Support: Accommodates all typical 3D printer geometries.
Z-Probe Support: Supports multiple Z-probes, including DC42’s IR Z-probe and the Duet3D Smart Effector specifically designed for delta printers.
Features of the Duet3 3HC Expansion Board
Processor: Utilizes a dedicated 32-bit ARM Cortex M4F operating at 120 Mhz.
CAN-FD Bus: Connect seamlessly to the Duet 3 main board, facilitating multiple expansion boards. It supports up to 8 x 3-channel expansion boards initially, adding an additional 24 stepper channels.
Stepper Drivers: Houses next-generation Trinamic 5160 stepper driver with capabilities up to 4.45A RMS, 6.3A peak. Includes full functionality with firmware control, 256 microsteps, StallGuard2, and StealthChop2.
PWM Outputs: Equipped with 9 PWM outputs of fluctuating current capacities to accommodate 3 extruders and 6 fans.
I/O Ports: Incorporates 6 I/O ports functioning for terminals, probes, filament monitors, and other sensors.
Temperature Inputs: Features 3 Thermistor/PT1000 inputs and supports 4 PT100/thermocouple inputs via an optional daughter board.
Z-Probe Support: Supports various Z-probes, including DC42 IR Z-probe and Duet3D Smart Effector tailored for delta printers.
Package Components: The standard package incorporates a connector set with a complete set of housing and crimps, but excludes the CAN-FD cable. It is advisable to purchase “ADSL 2+ High Speed Broadband Modem Cable RJ11 to RJ11” of the correct length separately.
Included in the Package
One Duet3 6HC motherboard
One Duet3 3HC expansion board
One Gray ribbon cable
Two Network port connection cables
40 Terminals

This detailed product description outlines the various features and components provided with the Duet3 6HC and 3HC motherboards, offering clear insights into the product’s capabilities and requirements.